Generally,when we choosing an injection molding machine for a mould,we will consider the mould dimension,mould height to check max&min mould height of machine;width and length to check the tie bar distance of the machine,if the mould could assemble onto the injection machine or not.

For thinwall containers and lids,we suggest use high speed injection molding machines,we have to consider the mould size,and also have to consider machine injection pressure and clamping force.When we invest an injection machine and a thinwall mould,we want to get high production efficiency,we must make sure the cooling system for the mould is good and the whole line running smoothly.

thinwall high speed injection machines,thinwall molding machine maker,thinwall molding machine supplier China,thinwall container mass production line,fast injection molding machines for thinwall lids

Email:  dkm@dakumar.com
MSN: dkm@dakumar.com

Thin wall plastic molding service is getting more popular,Dakumar manufactured high speed injection machine to adjust for thinwall injection molding service,and developed IML solution for thinwall injection molding service,IML solution to thinwall injection molding service can be environment friendly and saving materials.
Thinwall plastic molding service is a new injection molding ways whose minimum thickness is 0.45mm~0.55mm,with 4 or 8 cavities and the container volume can be 300ml,is used to making Airline cups,Ice cream box,Dessert container, Disposable cutlery, like knife,fork and spoon.Thinwall plastic materials usually is PP,PS or PE, and we always choose high speed injection machineto make thinwall injection molding products.Nowadays,IML solution is very popular for the thinwall injection molding service,because IML solution is very friendly for the environment and durable for packaging project.
The thinwall injection molding servicerequires high injection speed and short cycle time,high speed injection machine can do that for thinwall products. A supremely accurate design for thinwall molding, a high quality injection molding machine to cooperating with thinwall molding service ,and a fine IML solution to package a thinwall molding service, these three factors will offer a perfect thinwall injection molding service.
Dakumar is devoted to providing complete thinwall injection molding serviceaccording to clients’requirements,if it is needed,we will help client choose a suitable injection machine for their thinwall molding service,and recommend what's kinds of IML solution suiting for their products.If you feel interested in IML solution to thinwall injection molding service, pls contact Dakumar.

Post by Joyce Liu
Email: dkm@dakumar.com               Msn: dkm@dakumar.comSkype:sinomould-11

Thinwall injection moulding technology with IML（in mould labeling ）system

Minimum thickness of the products is 0.45~0.6mm can save material consumption in production.

Contact  Vicky

:sinomould-06

:dkm@dakumar.com

Mail: dkm@dakumar.com

To build plastic factory, you can come to China plastic mould supplier SINO MOULD, and order injection machine from Chinese injection machine company, but you are thinking if can buy plastic raw material China as well. buy plastic raw material China, plastic recycle material from China, PVC material exporter for moulds, recycle PP material exporter China is all needed.

This you need to seek an company that can produce buy plastic raw material exporter in China. However, now you do not need to make much trouble to find different plastic mould suppliers, injection machine suppliers and plastic resign suppliers. You can come to SINO HOLDINGS to do with a turnkey project supplier.

SINO HOLDINGS can export for your buy plastic raw material China, we export PVC material exporter for moulds, recycle PP material exporter China, PS clear plastic raw material, recycle PE plastic resin price very good level, U-PVC plastic raw material, ABS plastic material and PC clear plastic raw material. SINO HOLDINGS can offer your buy plastic raw material at very good price and fast delivery.

With all our support, you can start your plastic injection molding factory easy and quickly.
If you are interested, please contact dkm@dakumar.com or send message to Fancy, skype: sinomould.dakumar2

Sino holdings group ----the best PVC injection molding machine and PVC injection mould supplier in China! Our PVC injection molding machines are especially for producing PVC pipe fittings. Our PVC injection molding machine with below marked features:

1. Famous international brand components.
2. Special bigger nozzle design, hard chrome plated to prevent the corroding of PVC .
3. Widened safety door design, equipped with double core pulling devices (each one has two inputs and two outputs).
4. Equipped with PVC special purpose air hood of barrel, more accurate and reliable temperature can be realized which greatly prevent the raw material yellowing and property change
5. Oil cooling and water cooling system in screw barrel for large-sized machine.
6. Hardened chromed nozzle, large nozzle holt that ensures product flow and volume.
7. Oversized hydraulic motor matched to meet the large torque requirements needed for plasticizing PVC

Buy PVC injection molding machine, PVC pipe fitting mould from China most reliable PVC injection molding machine and injection mould manufacturer! We are the only factory in China which can offer you good turnkey solution! Easier in purchase, quick delivery, in time service! Contact us now.

Posted by : Miss Eva
Sino holdings group
PVC injection molding machine manufacturer—Dakumar Machinery
PVC pipe fitting mould manufacturer—Sino Mould
Email : dkm@dakumar.com
sinomould.dakumar6

Injection molding machines have an oil tank for supplying oil to hydraulic cylinder on the machine and mould.Lateral sliding valve control,injection molding machine control panel,molding machine lateral sliding groups,mould running oil cylinder,injection molding machine conditions.

If the mould need to use cylinder to drive the part moving,we have to use the machine supply oil and control the movements.Lateral sliding valve is used for controlling this kind of operation.Usually,for common size of injection molding machines,there are 2sets of lateral sliding.If the mould have more than two cylinders with different direction,we have to add lateral sliding valves when order the machine.

When we said the mould is OK for running on the injection machine,we not only consider the mould size and injection pressure,but also consider if the machine could control the mould well.

Injection machine oil supply is an important part for hydraulic injection molding machine.injection molding machine condition,injection molding machine control panel,molding machine lateral sliding groups,mould running oil cylinder,lateral valve sliding valve control.

Post by Celina
Email: dkm@dakumar.com
MSN: dkm@dakumar.com
 : sinomould.dakumar7

DAKUMAR as the chinese injection molding machine leader,could offer you high quality injection molding machine and injection machine screw barrel cleaning agent.DAKUMAR has became HAITIAN injection machine only competitor in china.
In the injection process, sometimes we need to change product to different colors. Usually, operators will use many plastic material to clear the before product color. It will cause big material wasting, very uneconomical for plastic product manufacturers.
Actually, there is a very useful cleaning agent in current market, that is injection machine screw barrel cleaning agent. Before we put the new ,clean plastic polymer particles into the injection molding machine hopper, we could spray some injection machine screw barrel cleaning agent in the plastic polymer particles, and then put into the injection molding machine hopper. You could use a very little material to clean the before color and add your need color to produce new product.
More information, send e-mail to dkm@dakumar.com, Jessie.

buy high quality injection molding machine,plastic injection molding machine company,HAITIAN injection machine only competitor,Chinese plastic injection machine company,biggest plastic injection molding machine in China

Generally, with the development of the injection molding machine, the classification of the mold becomesmore and more.The most common classification method is by the figure of the injection molding machine, mainly about the rank of the injection device and closing mode device:

1.Vertical Injection molding Machine
2.horizontal injection molding Machine
3.angle injection molding machine .

The advantage of Vertical Injection molding Machine is covering small a area, operating simply. The disadvantage is inconvenient to operate without fully automated operation. Compared with the Vertical Injection Machine, horizontal injection Machine have the following advantage : the low center of gravity ensure the convenience of operation and maintance, fully automated operation. Angle injection machine is applicable for various sizes of injection machine,for after degating no small witness mark remains on the appearance of plastic parts.
DAKUMAR injection machine (www.dakumar.com) ranks on the top of the international machine market, holding its advantage of best elements setting, high technology superior precision controlling and thorough energy conserve mentality. There are various kinds of the DAKUMAR injection molding machines:

• servo power-save injection molding machine
• high speed injection molding machine
• mixed dual-color injection molding machine
• multi-material injection molding machine
• PVC injection molding machine
• standard injection molding machine
• variable injection molding machine
• PET injection molding machine

MSN:dkm@dakumar.com
SKYPE:sinomould-16

DAKUMAR company of SHG is prefessional supplier and exporter of PET bottle blow moulding machine at home and abroad and also gained the great appreciated bu our clients,our bottle blow moulding machines shortened the products' cycle time in some degree.Perfectly man-machine interface is also save the labor cost.
We produce four typessemi-automatic stretch bottle blow moulding machinesand a type full-automatic PET stretch blow moulding machine,we also havea dedicated bottle blow moulding machine for manufacturing 5-gallon bottle and 25L wide mouth jar.you can choose the above machine according to the below introduction.

semi-automatic stretch bottle blow moulding machine

SN22-III,SN22-III-D and SN22-III-E almost have the same feature such as designed by CE standard,with microcomputer controlling system,which can precised operate,also they can all operate by one person without training,its safety and easily.the semi-automatic stretch bottle blow moulding machine can produce carbonated beverage,mineral water bottle,cosmetics bottles and hot-filling bottle.the advantages are :
SN22-III-D is improved on the basisi of SN22-III,the PET bottles can resisted high temperature 95degree.SN22-III-D is fit to blow hot-filling bottles.
SN22-III-E is improved on the basis of SN22-III too,the PET bottles can resisted high temperature 98degree.SN22-III-D is fit to blow pp or Bopp high temperature resistant bottles.
SN22-IV is suitable for mass production of jars and bottles for small and medium scale factories.
Between SN22-III and SN22-IV,the main difference is the volume of the output.SN22-III is 1000pcs/h for 600ml bottle,0.1-3L volumn,2-cavity and SN22-IV is 300-1000pcs/h,0.1-12L volume,2-cavity.you can choose according to your demand.

full-automatic bottle blow moulding machine

SSN-B series is the most stable two-step automatic stretch bottle blow moulding machine,it has one to two cavities,the maximum capacity of products is 0.6L to 1.5L,the machine can have 6 cavities at most.the quality and the performance is good enough to satisfy youe demand.

a dedicated bottle blow moulding machine for manufacturing 5-gallon bottle and 25L wide mouth jar

SN22-V is specially design 5-gallon bottle and 25L wide mouth jar and its output can reach 90pcs to 120pcs for hour of output 5 gallon bottle.there have many advantages for your choose.

You can enquiry more detailed informations from me about the bottle blow moulding machine.

post by carol Email: sino dkm@dakumar.com
MSN: dkm@dakumar.com

sinomould-14

China is a main supplier in the world for plastic industry,include plastic moulds and machines,there are many famous plastic exhibitions in China,such as Chinaplas,Asia mold,PEC China,Canton Fair and so on.

In April,there will be held two large scale exhibitions in China,Canton Fair 111th in Guangzhou from April 15th to 19th,first period for machinery;Chinaplas 2012 Shanghai,from April 18th to 21st,for plastic industry.

Sino Mould Co.,Ltd and Dakumar Machinery Co.,Ltd will participate these two exhibitions in China.We will also attend NPE 2012 in America and Plast 2012 in Milan,Italy.If you need any information about our company,please do not hesitate to contact me.Thanks.

Sino Mould is a professional injection mould manufacturer,we supply different kinds of mould all over the world.We could supply a turnkey project for you.Chinaplas 2012 Shanghai China,Canton Fair Guangzhou China,Famous plastic mould suppliers China,famous injection machine maker China,largest plastic molding company China.

Post by Celina
MSN: dkm@dakumar.com

: sinomould.dakumar7
Email: dkm@dakumar.com

Dakumar can supply you high quality in moulding injection machine,inlcuding standard plastic injection machine, servo motor injection moulding machine, high speed injection machine,variable injection moulding machine,Dual-color injection moulding machine,PVC injection moulding machine,PET injection moulding machine.

-Dakumar standard in moulding injection machine from 50T to 1600T. They are use for the universal plastic processing industry which have high performance,good stability and long life time.
-Dakumar servo motor in mould injection machine from 50T to 1600T, which have the characteristics, high response, low noise, high-control precision,saving enery.
-Dakumar high speed in moulding injetion machine from 118T to 780T, They are suit for injecting packing products,the high-requested packing products,engineering products. Such as fast-food container, shell of CD and DVD,telephone charger box and so on.
-Dakumar variable in moulding injection machine from 88T to 500T. They are oil saving,Energy-saving,environmental protection water and power saving.
-Dakumar Dual-color in moulding injection machine from 140T to 1000T. They are for double color product injection forming.
-Dakumar PVC in moulding injection machine from 118T to 650T. They are special for producing PVC pipe fitting.
-Dakumar PET in moulding injection machine from 118T to 650T, They are special for producting PET preform.

Please feel free to contact me , if you are interesting in plastic injection machine,injection moulding machine,molding machine,injection machine,injection machine supplier.

E-mail: dkm@dakumar.com
Posted by:Sara