in order to meet fast cycle molding for high standard and big quantity products manufacturing, especially for thin wall molding line, Sino Holding new developed fast cycle high speed injection machine would be your best choice.

We offer hybrid injection molding machines, machines with MOOG valves for precise control, and have two sets servo hydraulic systems assembled, one set for mould open and clos control and material stocking, 2nd set used for accumulator oil filling and ejector function. To reduce the cycle time for high efficiency. This high speed hybrid injection molding machine is suited for thin wall products,packing products, disposable plastic cutler etc…

Contact: dkm@dakumar.com

Skype:Sino-mould-08

Sino Holding group new research and development a new injection molding machine Oil-electricity Hybrid molding machine. The characteristic of this machine are, high speed, high precise, high stable，shorter cycle time, energy saving.
Hybrid molding machine High speed：Shorten the injection time；Injection speed 400mm/s.For thin wall product，filled in 0.5S.
Hybrid molding machine High precise：Moog(America) servo valve control system combination with (Austria)KEBA computer. Mold open and close can be reached 0.5mm，it is enough for robot operation and coordinate
For Hybrid molding machine mould open ,material filled, product take out at the same time. The cycle time would be shorten 30% even above.
High quality servo molding machine Energy saving：Servo hydraulic motor from motionless to rated revolution only need 0.02S would be saving 80%energy.

If you're interested in this machine,pls kindly contact with me.

Posted by Vicky

:sinomould-06

:dkm@dakumar.com

Dakumar Machinery is professional blowing molding machine supplier in China, can offer blowing molding machines, also can offer blowing molds and blowing molding production line for you.
Blowing molding machine is suitable for oil bottles, shampoo bottles, candy bottles and artware bottles, these bottles was blown directly by the blowing molding machine.
The molding technology advantage: only need blowing molds and blowing molding machine and air compressor, the input is less than injection molding.
Disadvantage: the parting line is a little obvious, need cut the flash. It is suitable to make some rough and low transparent products.
Dakumar can offer the blowing molding machine and blowing molds, is good blowing molding machine supplier in China. Semi-automatic blowing machine and automatic blowing molding machine can be offer to you as your production requirements. If you want to know blowing molding machine supplier contacts, pls email or contact Miss Joyce.

Email: dkm@dakumar.com
Skype: sinomould-11
TEL: 0086 576 81116157

When you want to start a new production line for plastic products, auxiliary plastic equipment is essential factor for the business starting. Where to find a good auxiliary Plastic Equipments maker? How to check the quality of auxiliary Plastic Equipment?
Dakumar is a famous plastic machinery maker in China, is professional plastic machinery supplier who can solve your worries when you order machines here.
When you order the plastic machinery in our company, you will want some auxiliary plastic equipment, like auto-loader, mixer, crusher, mold temperature controller, and others. We can offer you these auxiliary plastic equipments as you told us. When you come here for inspecting the plastic machinery, we can arrange all the auxiliary plastic machines together, let you run and check it is ok or not. It is a good way for you check all the machines is ok or not, and you can make sure they will be normally work after shipping back to your factory.
Firstly, it can reduce the cost for finding another supplier; Secondly, you can 100 % confirm the quality of the machines. The most of importance, we can offer commissioning engineers to help you producing and staff training.
Find plastic machinery, pls contact Dakumar; find auxiliary plastic equipmentsupplier, pls contact Dakumar also, The whole plastic products making line can be offer for you from Dakumar. Thank your attention for Dakumar.

Post by Miss Joyce.
Email: dkm@dakumar.com
Skype: sinomould-11
TEL: 0086 576 81116157

Plastic injection molding machine has different size screw and barrel, normally it has ABC and also D model for big machine.Different model screw and barrel can be chosen to meet different production requirement.

There are many variation between ABC screw and barrel machine, the performance of injection machine with different screw and barrel type differs a lot. But the most important is that for A type, because of the space for the screw between is small, it is suitable for high precision production. B type is standard while C is the biggest injection capacity, but because of this, the clamping force would be less and it is also not suitable for high precision items production. If your products is not special, B type screw and barrel is suggested which enables best molding machine performance realization.

Alice
dkm@dakumar.com

There are many injection molding industry beginners in African countries where plastic products are still new or very popular in those markets.New plastic injection molding company set up is one favorite investment plan for many customers.

Sino Holdings Group offers plastic turnkey project,we can make a complete tailor-made solution for different customer’s plastic injection molding factory set up requirement. Only if you offer us the information of your factory layout, your project expectation,budget info, we will make out a detailed solution for you to carry out accordingly. We offer plastic moulds, injection molding machine, molding auxiliary equipment,technical support,including engineer training, equipment installation and adjustment.

If you want to set up a new injection molding company, we are interested to work with you.

Alice
dkm@dakumar.com

IML (IML is for in mold labeling) injection molding devices include injection molding machine,injection moulds,IML Robot and some other necessary additional machines.Sino Mould China is specialized in offering high quality turnkey solution for IML line.

Sino Mould China have made the IML line for 1L bucket,150ml ice cream container,200ml ice cream container,450ml juice cup,4L paint bucket and so on with multi-cavity IML solution.We also made big size containers like 20L paint bucket,18L paint bucket and table surface with IML solution.

As a company for both the injection molding machines and moulds with more than 20years experience,we could supply the whole injection molding line for you.We could offer one stop service from product design,mould design and tooling to after sales service.We could arrange our engineers to customer's workshop for assembling the mould and machine,and training for the staff.Please feel free to contact me if there is any question.Thanks.

Post by Miss Celina
Email: dkm@dakumar.com
Skype: sinomould.dakumar7
MSN: dkm@dakumar.com

Our hybrid plastic injection machine is a high performance molding machine, the machine use advanced component with accumulator, it can quickly achieve mould opening, ejection, plasticzing three actions at the same time; it reduce the mould cycle time.

To make a plastic product, power cost will be around 50% in production cost. So use a high performance molding machinecan reduce the production cost, as well as product cost. For a molding machine, high performance means the maximize use of energy. Under the same time and power condition, a good molding machine can produce more products, so as to reduce the production cost.

The hybrid injection machine use servo motor, that kind of motor is not work when the mould is cooling and pressure holding, so it also help to save power.

If you have any inquiry about our hybrid machine or high performance injection machine, please do not hesitate to contact us.

Post by: Ms. Ellen
Email: dkm@dakumar.com