Dakumar is the famous plastic machine supplier, we manufacture the high quality plastic machine, we know what customer requirement is and optimize all differed kinds system to make the injection machione more perfect. Many customer want to get the long life plastic machine and they always want to get the injection machine from supplier is guarantee with long life, but the long life also need yourself protective.

1．First suggestion to make long life plastic machine.The additional material like GF and mental powder will cause the screw wear and tear, in order to increase the screw life, we should properly increase the temperature and reduce the screw speed rate, or chroming.

2．Second suggestion to make long life plastic machine.Avoiding long time running the plastic machine in the high speed and high pressure condition.

3．Third suggestion to make long life plastic machine.Some mistakes could cause by the human factor, like put the wrong plastic material, which material need the high temperature, but the barrel have not reach the high temperature, so it need much power from the screw, so it will make the screw break off.

4．Forth suggestion to make long life plastic machine.All the plastic material heating will resolve acidity gas. And the material is easy stick to the mould, so we had better choose stainless steel machine parts and by the way ,in the technology ,we should use the low back pressure and low temperature, so that it can reduce the plastic material degradation.

What factors influence plastic machine life? It depends on the machine self performance but also your need to clean everyday and pay attention on the little detail. If you want to order the good plastic machine, you could contact Dakumar for it, as we can offer you the booklet which contains so many years’ experience, it will prolong the machine life according to our experience.

sinomould-14