Date:2015-12-05 13:10:25
For plastic injection molding system there need injection machine,also need some auxiliary equipments for injection machine for best modling,like Auto loader,Hopper dryer,chiller machine,mold temperature controller etc… Chiller of injection machine For cooling moulds to reduce products molding cycle, also they are available in the cooling of equipments in order to maintain a normal temperature. Besides, they are suitable for other industries with the need of cooling. |
Auto loader of injection machine Chipped material is usually delivered with container. Mostly, the material is supplied directly from the container to the feeding hopper of injection molding machine. Here is another way to supply the material from material stockyard by using the centralized feeding system. |
Hopper dryer hopper dryers offer an effective and low-cost method for plastic material drying. Hot air is used to dry wet materials that due to moisture absorption during packaging, transportation, and recycling cycles. They can be directly mounted on the moulding machine for quick drying and space saving. |
Mixer of injection machine |
Since high temperature material is injected into the cavity, the mold is seized by heat. To prevent seizing, it is necessary to spray lubricant onto the surface of the cavity at each shot. This unit mixes condensed lubricant with water. At the same time, magnifies it as required density (usually 1:60~1:100) , and delivers it to automatic lubricant spray unit or handy type spray. |
Mold temperature controller of injection machine |
In case of Aluminum die-casting, mold is chilled down by water. Solidification time of magnesium is very short under low temperature. To get better flow rate and distance of melted material, it is necessary to heat up the mold. The machine starts running after the mold is heated up around 200Ae by oil or electric heaters and keeps it during the production. |
Automatic vacuuming system of injection machine |
Melted material must be injected into the cavity within a few millisecond. Improving the product’s quality, such as the shape of boss and rib, the vacuuming system is required. In actual process, the material is injected after the cavity air is completely sucked out. |
:sino-mould-08Mail: dkm@dakumar.com
Tag: injection auxiliary equipmentsinjection auxiliary machineschillerloadermold temperature
